| T O P I C R E V I E W |
| sportster45 |
Posted - 07/14/2012 : 9:22:46 PM
90hp. Johnson model #GLSTA
The problem I'm having is with the power trim unit.
I fished with the boat last weekend and everything was fine.
Today I go to do some general cleaning of the exterior and when I tried to trim the motor down to flush the motor,it won't go but half way down. If I hold the trim switch I can hear it humming like it does when I'm trimming down,but it only goes half way down. It does go all the way up when I trim. If there is someone out there that would be able to help me fix it are fix it themselves,I'd be happy to contact you.
Thank You,
Nathan
I can be reached at:shawnnateroux@cox.net
and we can exchange phone numbers
|
| 5 L A T E S T R E P L I E S (Newest First) |
| Secret Formula |
Posted - 07/15/2012 : 6:08:02 PM
Nathan,
I'll be in Lafitte when we get a little closer to Duck season, and then once the big season starts i'll be down there every day while the season's open until 2013. We can catch up then at Cocheria's
Fret Not, today is the tomorrow you worried about yesterday! |
| sportster45 |
Posted - 07/15/2012 : 5:20:19 PM
Mike, Sure was nice to see the motor go up and down.
You get near Lafitte I got the first cold one.
I should post here more often. It's a shame I'm a lurk-a-holic.
Learned allot lurking. More post to come.
Nathan
|
| Secret Formula |
Posted - 07/15/2012 : 1:09:23 PM
Glad to help Nathan, and it didn't cost you a dime!
Mike
Fret Not, today is the tomorrow you worried about yesterday! |
| sportster45 |
Posted - 07/15/2012 : 10:14:47 AM
Thanks a Bunch. That was my problem.
In all the years of owning that motor I never
knew about that trailing lock Always used the
trailing bracket.
Again,thank you for your help.
Nathan
|
| Secret Formula |
Posted - 07/15/2012 : 08:44:00 AM
First, make sure that the engine trailering lock is not engaged, otherwise it sound like the system is operational
Fret Not, today is the tomorrow you worried about yesterday! |
large
